Enable and Modify ONVIF on Diamond IPC

ONVIF will typically be enabled, set to authentication, and will initialize with the password that the device was activated with. This guide will cover the various ONVIF settings.

Modify the ONVIF credentials

Log into the IPC and select "Setting"

image-1631648384416.PNG

Click "System" then "Account"

image-1631648446959.PNG

If you need to modify your ONVIF password:
Click "ONVIF User" then "Modify"

image-1631649358456.PNG

Enter the "Old Password" (password used to initialize the camera) and "New Password", then retype the desired password on "Confirm Password"
Press "Save"
Note: If the camera password does not take, please use "admin" as the old password.

image-1631649447015.PNG

You will receive a confirmation if it was successful

image-1631649525487.png

ONVIF Authentication

Select "Network", then "Access Platform"
Click the "ONVIF" tab and select "On" for Authentication.
Click "Save".

image-1631652093474.PNG

Enable/Disable the ONVIF function

Select "System" then "Safety"
Enable "Onvif Service"
Click "Save."

image-1631652145114.PNG