ENS Analog HD Camera Audio Over COAX on Titanium DVR

This report is composed to show findings of an ENS Analog HD Camera, Specifically model SCC35T4M/28-H that shows camera's built-in MIC working over COAX with a Titanium DVR.

 

Analog HD camera, Model SCC35T4M/28-H

Needs to know if Built-in Mic will work on a couple of DVR's trough any of the HD protocols. 

 

 

  1. ED8216H5-F2

  • CVI: No Audio
  • TVI: Audio Works Perfect
  • AHD: No Audio
  • CVBS: No Audio
  • Chrome: Audio Yes
  • Edge I.E Mode: Audio Produced

 

Screenshot 2022-03-08 130758.png

**The Difference between this recorder and the others was that it has a "Audio Over Coax" Setting under Camera Signal.

 

 

2. ED8432H5-D2

  • CVI: No Audio Produced.
  • TVI: Audio Works Perfect.
  • AHD: No Audio Produced.
  • CVBS: No Audio Produced.
  • Chrome: Audio Yes.
  • Edge I.E. Mode: Audio Produced.

 

Screenshot 2022-03-08 130758.png

**This DVR ALSO has the setting under the "CAMERA SIGNAL" Setting page. 

 

 

  1. ED8016H5-BN

  • CVI: No Audio
  • TVI: No Audio
  • AHD: No Audio
  • CVBS: No Audio
  • Chrome: No Audio
  • Edge I.E Mode: No Audio
 
4. ED8004H5-FN (firmware ver. 1.3.8 audio over coax not available in ver.1.3.7 or older)
  • CVI: No Audio
  • TVI: Audio Works Perfect.
  • AHD: No Audio
  • CVBS: No Audio
  • Chrome: Audio Works Perfect (using IE tab)
  • Edge I.E Mode: Audio Works Perfect.

To finalize, Titanium's native protocol for analog is TVI, so therefore, TVI works with Audio over Coax on Titanium devices. When using a Diamond recorder, the native Analog Protocol is CVI, so therefore, CVI Audio works over COAX on Diamond devices.